I wasn't happy with the excessive gap I'd created on the panels back from the door, so I measured & marked, then used another pice of the thin ply as a mold. Added 1/4" to one, and nearly 3/8" to the other. Much happier now!
-
20220106_154027.jpg
-
20220106_154042.jpg
-
Today I started covering a kick panel, and decided to try rattle can contact cement, thinking that if I pulled it tight and stapled it would be OK. BIG mistake! The carpet piece was OK, but the vinyl wouldn't stick tight, defining the line of foam. I was able to peel it back, and came in to order a gallon of the right stuff! Wildwood Landau Top Contact Adhesive.
-