Quote Originally Posted by 34_40 View Post
Hey that works pretty slick! Good idea! Looks nice too. Can you do the same technique to the curved piece in the other (horizontal)
plane so it can bend and blend the 2 pieces together?
The problem is if I cut the corners in the horizontal the top stays fixed but the bottom, below the grooves has to get longer. Easier to use a bit of bondo or a piece of ply on the low side, then sand to make a ramp but I'm thinking the gap will disappear with some creative application of foam beneath the vinyl. It's behind the seats, anyway so likely a "Who Cares?" point. I'll leave it for now and talk to the stitcher, unless I'm the stitcher......