Originally Posted by
lamin8r
Yup,,good idea on the holes.. Whenever I do a glass over ply,,I aways sand the ply well,or with disc grinder,,and slop a good strong coat of resin on it,,and let it sit over night.. Then scratch it up well in the morning,and get a good key to the top surface.. After a while,,(years) I have found a bit of de lamination with polyester resin,to ply..
I have been using a product called''bendy ply'' (down here),,on the 32 chassis,for a form fitting floor,,available in varying thickness..The last sheet I used was 1/4'',,with three layers of 600CSM mat over the top,,and another three on the bottom.. Makes for a bulletproof floor,,about 1/2'' plus thick..If we do a simple GOP floor here in NZ,,we have to put steel inserts inside each hole we drill through the floor,,to satisfy our certification process..
Glad to see I'm not the only one to use melteca(melamine) sheets for laying up flat sheet stock..Usually got a bit of varying thicknesses in stock,for the little jobs that pop up..