Todays activity was centered around roof repair. The roof had a dent with a slight crease in it. I ended up cutting the inside panel open to knock out the dent. It's about as good as I can get it, the inside panel just is really in the way to do lots of dolly work. At this point it's less than 1/16 depth off at any point. I hoping that's good enough. I have NO body work knowledge so feel free to chime in here.


This next picture shows the back of the roof and as you can it has many little dent's, flat spots. I'm thinking rubber hammer or steel with dolly to try to push them out. Maybe lead the in ?

What is a reasonable thickness for bondo ?