Thread: '67 Mustang Convertable build

Tweet

This is the third time i have tried doing the organized picture thing with subtitles, the other times have just one into cyberspace.
there is a picture of the torque box repair, welded.
A picture of the toeboard tacked into place, i had to cut a reinforning rib out of it so's it'd lay flat.
There is a picture where i am making the clamps to draw the floor pan down, i used 5/8ths allthread and odd pieces of box tube. It wasn't enough as i had to drill and add some local fasteners at various places.
There is a picture showing the top reveal of the framerail (inner rocker), it is running high twards the front, i stuck a bottlejack (another picture) under it and pushed it into place then tacked the leading lower edge of the framerail. I moved the bottlejack toi the rear and pushed upward from the floor and tacked the rearward lower edge. I then moved the bottlejack back to the middle to push out a slight crown.
The final picture is the framerail tacked in place.