Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree4Likes
  • 1 Post By Dave Severson
  • 1 Post By jerry clayton
  • 2 Post By ojh

Thread: '66 Mustang project
          
   
   

Results 1 to 12 of 12

Threaded View

  1. 08-20-2012 11:23 AM #6
    ojh
    ojh is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Aug 2010
    Location
    Berryville
    Posts
    486

    I've run into a snag. I have leveled the car and it is situated proper. I have the jig below it level and square to the body. I started to drop referance points down to the jig so i could construct the fixture for the front frame, the fixture would duplicate the existing and i would be able to assemble the new frame back to the exact suspension points of the existing. The very 1st two points (the lower control arm mounting bolts holes, side to side) are 3/8" difference from each other!
    I will have to order up the blueprints for the frame as the assembly manual that came with the Mustang dosn't have that info.
    Attached Images
    Last edited by ojh; 08-20-2012 at 11:25 AM.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink