Thanks Guys.
Its not perfect but a little filler is allowed.
Printable View
Thanks Guys.
Its not perfect but a little filler is allowed.
Finally got back to the chassis work.
I made up a couple of rad support posts and two outriggers to mount the new front clip on.
I welded two tabs at the top of the support posts and bolted two tabs to the bottom of the frame rails for the radiator isolators to bolt on to.
http://www.clubhotrod.com/photopost/...59_Medium_.jpg
I finally got the new (used) mill running and machined out the tabs for the rad.
These will bolt to two 1/4'' aluminum side plates. The plates will then be welded to the rad to spread the load rather than just having the tabs welded to the sides of the rad.
http://www.clubhotrod.com/photopost/...46_Medium_.jpg
http://www.clubhotrod.com/photopost/...47_Medium_.jpg
Rubber isolators I found on line.
They are good for 55LBS each in shear.
http://www.clubhotrod.com/photopost/...51_Medium_.jpg
Thanks for looking,
Nice looking mounts Pugs, should work out great!
BTW, what did you buy for a mill????
Thanks Dave.
I got one of these babies:
http://www.clubhotrod.com/photopost/...03_Medium_.jpg
Of coarse this is 3 weeks later after painting and changing all the broken stuff.
Nice mill, digital read out and all!!!!!
Nice work on the brackets!. One of those mills is pretty trick to have!
Crazy Cool build and i thought i had alot of metal work in my ride wow impressive!
Thanks George.
The front metal is taking forever.
I did manage to get the pasenger side grill opening cut out.
I'll post some pics later.
I cut out the second grill opening, made up the collar and got it tacked in place.
http://www.clubhotrod.com/photopost/...09_Medium_.jpg
http://www.clubhotrod.com/photopost/...15_Medium_.jpg
http://www.clubhotrod.com/photopost/...17_Medium_.jpg
Got it welded and found the shape was way off.
I had to get the torch and BFH out and start adjusting.
You can see the heat marks in the pic below.
http://www.clubhotrod.com/photopost/...23_Medium_.jpg
http://www.clubhotrod.com/photopost/...21_Medium_.jpg
This pic shows the shape nicely from the side.
http://www.clubhotrod.com/photopost/...20_Medium_.jpg
Thanks for looking,
Great looking grille openings! As always really first rate metal workin' Pugs!!!!!
Thanks Dave.
Pics make it look better than it is.
Lots of waves and wows to take out........Its driving me crazy!!!!!!!!
Yeah, it takes some dingin' and pingin' time to get everything right.
I hate it when things drive a guy crazy, for me it's such a short trip!!!!!!!!!:whacked::whacked::LOL::LOL:
Looking at the 1/8" thick steel headlight plates was also driving me crazy with the lousy connection seam at the fender and the disgusting welds in the back.
I made a hammerform and made up a new plate.
http://www.clubhotrod.com/photopost/...66_Medium_.jpg
Cut out the opening......
http://www.clubhotrod.com/photopost/...85_Medium_.jpg
And tacked in place.....
http://www.clubhotrod.com/photopost/...01_Medium_.jpg
Welded up and the proud ground off. Still needs planishing and metal finished.
http://www.clubhotrod.com/photopost/...09_Medium_.jpg
And here's a shot of the piece I cut out. Its self explanetory as to why it was driving me nuts looking at it.
http://www.clubhotrod.com/photopost/...12_Medium_.jpg
Thanks for checking in,