Thread: 28 AV8 Tudor
Threaded View
-
04-03-2011 11:58 AM #1
28 AV8 Tudor
Heres' one i am doing now, very traditional tudor with a 59A flattie, '37 toploader, model a banjo rear. I kicked the rear 4", boxed the frame and made the 'k' member; the front axle is dropped 3 1/3", the original wishbones lengthened and rear radius rods are 40ish. I am now just mating the body to the frame, the body had the interior and i pulled that out and gave it a coat of rust inhibitive primer so that i could see what was what in there.
Right now i have the cowl off and taking it apart to build internal structure for cowl steering, i used a mustang steering box and reversed the direction. When the support is done it'll bolt into the chassis right along with cowl and gas tank.
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance