Thread: Project "Left Overs"
Results 1 to 15 of 237
LinkBack URL
About LinkBacksHybrid View
-
01-20-2011 02:42 PM #1
CHR Member
- Join Date
- Nov 2004
- Location
- orange
- Car Year, Make, Model: 4- 32 fords
- Posts
- 1,609
Thanks, but I couldn't get it to come up it went to a new car site.
-
01-20-2011 02:53 PM #2
CHR Member/Contributor
- Join Date
- Sep 2007
- Location
- Gardner, KS
- Car Year, Make, Model: '33 HiBoy Coupe, '32 HiBoy Roadster
- Posts
- 11,245
Not sure what happened. Try this one - http://rodcustom.automotive.com/8711...uspension.html
Originally Posted by Ken Thurm
Roger
Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.
-
01-20-2011 03:02 PM #3
CHR Member
- Join Date
- Nov 2004
- Location
- orange
- Car Year, Make, Model: 4- 32 fords
- Posts
- 1,609
Yep that worked. I'm going there tomorrow I will stop by. Thanks
Ken
-
01-20-2011 03:42 PM #4
CHR Member/Contributor
- Join Date
- Sep 2007
- Location
- Gardner, KS
- Car Year, Make, Model: '33 HiBoy Coupe, '32 HiBoy Roadster
- Posts
- 11,245
Ken, Originally Posted by Ken Thurm
There was a post on HAMB back in 2009 asking if IMC was out of business, saying they could not get a web link to work, but there was no definitive answer. Hope you find what you're looking for at a reasonable price.Roger
Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.
-
01-20-2011 03:42 PM #5
CHR Member
- Join Date
- Jan 2006
- Location
- fort myers
- Car Year, Make, Model: '27 ford/'39 dodge/ '23 t
- Posts
- 11,033
When Dan gets home from work tonight I'll ask him.........somehow he has the most obscure sources and products cataloged in his head.
I think he and I discussed the SS wishbones one time, so he might know.
Don
-
01-20-2011 05:46 PM #6
CHR Member
- Join Date
- Apr 2001
- Location
- Salado
- Car Year, Make, Model: 32, 40 Fords,
- Posts
- 10,898
That's the guy I talked about above. If you don't reach him on your trip over let me know while you're still there in town. He's supposed to have a set or two still available, but has quit making them otherwise.............................unless like I said, if there's sufficient motivation. Originally Posted by Ken Thurm
Last edited by Bob Parmenter; 01-20-2011 at 06:26 PM.
Your Uncle Bob, Senior Geezer Curmudgeon
It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.
Luck occurs when preparation and opportunity converge.
-
01-20-2011 08:38 PM #7
CHR Member
- Join Date
- Nov 2004
- Location
- orange
- Car Year, Make, Model: 4- 32 fords
- Posts
- 1,609
Don - It's called youth
No hijacking intended 
Uncle Bob - 10-4 Thank you
-
01-20-2011 08:42 PM #8
CHR Member
- Join Date
- Oct 2007
- Location
- Petaluma
- Car Year, Make, Model: 48 Ford F1
- Posts
- 9,795
Ken I ran into the same info but did find this:
Industrial Metal Craft
Place page
4715 West Harmon Avenue
Las Vegas, NV 89103-5215
(702) 873-8664" 
"No matter where you go, there you are!" Steve.
-
01-20-2011 10:16 PM #9
CHR Member
- Join Date
- Jan 2006
- Location
- fort myers
- Car Year, Make, Model: '27 ford/'39 dodge/ '23 t
- Posts
- 11,033
Ken, I spoke to Dan and he remembers them, they had two versions. One was just like a regular wishbone and the other had a hole in it for the tie rod to pass through. He has that info in his computer somewhere and will try to dig it out. I'll keep you posted.
On another note, my tires from Coker showed up today. The 8 inch Firestone rear slicks are perfect for the rpu, and I like them even better than the 10 inchers I had on the 23. My fronts came too, so as soon as I get my rear rims back from the powdercoater I can get them all mounted. I was impressed that they got here this fast. I placed the order Tuesday and they showed up today, Thursday. I used my HAMB Alliance discount and saved $110.00! That is about 10%.
Tomorrow my plans are to start beveling the cuts on the front frame rails so I can get those welded up. My 34 axle should be here any day now.....anxious to see that one come.
Don
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I know this is a little early but, this site is down more than it's up, so...................... Here's hoping everybody has a great holiday season and my best wishes for a great and prosperous new...
Merry Christmas and Happy New year