I made Thanksgiving Day my day in the shop and spent the time taking the front clip apart. The fenders are surprisingly good, both will require a small patch panel in the bottom rear of the fender, but that's about it. I also removed all the brackets, braces, inner fenderwells, vent ducts, and dissassembled the grille. The bar on the grille where the directional lights go is in three pieces and made of pot metal, I have a plan to glue the thing back together and use it for a plug to make a fiberglass mold... The front bumper is structurally sound and straight, but the chrome is toast....Probably going to replace it with a home built 'glass piece, too.