Threaded View
-
08-31-2010 04:40 AM #1
Sneak Peek ..... Thames 8/30/2010
All chassis work has been completed and the unit has been media blasted and hung in the booth for paint
Chassis extensions have been welded in place
notch in the right suspension tower has (for lower radiator hose clearance) has been completed
9" Ford rear housing ready for paint
Springs and control arms
installed new filters in the booth and the paint was sprayed last night
We did end up finding part of the problem, we did not put O-rings on the distributor shaft which was sending oil up the shaft instead of sending it to the lifters, adding O-rings quieted it down but...
New guy from Utah.