top end kit for sale

[91 camaro 383]

This is a complete top end kit for 305 350 383 400 sbc engines from 1968 to 1995 it consist of
PAIR OF STRIKE FORCE SBC ALUMINUM HEADS STRAIGHT plug
200 CC PORT VOLUME 64 CC BRONZE VALVE GUIDES
SET UP FOR .500 LIFT
2.02 AND 1.600 STAINLESS 1 PIECE RACE SERIES VALVES .100 LENGTH
CHROME MOLY RETAINERS AND KEEPERS
ERSON RACE SPRINGS
3/8 19000 SCREW IN STUDS AND GUIDE PLATES
POSITIVE VALVE STEM SEALS
ARP INTAKE BOLT KIT
PROFESSIONAL PRODUCTS CROSS WINDS INTAKE MANIFOLD
DUAL ROW ADJUSTABLE TIMING SET
5/16 CHROME MOLY PUSH RODS
FULL PBM CORTECO GASKET SET
CHROME VALVE COVERS
PERFORMANCE ERSON CAM SHAFT 230/230.480.480
PBM CAM LOCK KIT
1.51 ERSON FORGED ALUMINUM ROLLER ROCKER ARMS FULL NEEDLE BEARINGS WITH
POLY LOCKS
edelbrock 750
VERY NICE PACKAGE
port matched to a 1204 gasket
heads include a $1300 port and polish service from bryan fields of portworx performance

$1200 with carb $1000 w/o

i am parting with this top end because it wont keep up with the rpms my motor pushes out (about 10,000 rpms) i collapsed a lifter with this top end combo because the springs would float on me in the high rpms and didnt have ne power up top. there is nothing physically or mechanically wrong with this kit from running. looks like new runs like new and if you want pictures of each indivual part i can do that also

http://i209.photobucket.com/albums/b...Themaro109.jpg

http://i209.photobucket.com/albums/b...Themaro100.jpg