Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Thanks, Kyle . . .
          
   
   

Results 1 to 2 of 2

Threaded View

  1. 01-19-2007 01:43 PM #2
    Henry Rifle's Avatar
    Henry Rifle
    Henry Rifle is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Apr 2004
    Location
    Little Elm
    Car Year, Make, Model: 34 Ford Low Boy w/ZZ430 Clone
    Posts
    3,890

    And, by the way . . .

     



    Did you ever hear of a freakin' drill press? I can't find a single tapped hole on this project that was run in using a drill press ora mag drill. Evidentally, the fabricator had one leg shorter than the other.

    More to come, most likely.

    Jack
    - and the beat goes on . . .
    Attached Images
    Last edited by Henry Rifle; 01-20-2007 at 12:42 PM.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink