-
newb lookin for advice
Well this is my first project and I was hopin to get some advice. I have an 89 mustang that I want to put a V8 in. I just got three 302's given to me 2 run. and I just bought a two holley 450's w/ a mr. gasket street scoop ($150) I want this to be street but if I want I can go to the track and have fun also. I wanted to go w/ a tunnel ram. any advice on what to do and keep my spending down. thx
-
well i dont know about that stuff but some of the other members do.
welcome to CHR.
Dan
-
Like Bill said, unless you are going to build a high compression, hi revvin motor, leave the tunnel ram on the bench. Takes a lot of motor and a lot of rpm to make a tunnel ram work. RPM range, depending on cam selection, is usually in the 3500 to 8500 RPM range. To build a motor to run at that level it's going to be a race gas only, hi buck deal.