Thread: 450 holley carbs
Results 1 to 6 of 6
Threaded View
-
06-01-2016 05:58 PM #1
450 holley carbs
ok one is getting gas to the center squiter the other not.. i tryed changing the front bowl, replacing the rubber diaphragm gasket,, i checked to make sure the gaskets are on right so all holes line up. blew holes out with air. .all clear.
this carb is on the right i have a edlebrock cross ram. rebuilt both carb. they were both doing this at first but one came out of it. after a few days i swaped the bowls just to see what would happen..on each carb..ok so now the left one is working and the right one( this was working before i swapped the bowls not it not.)..i guess the fuel pump is to small to handle both 0.3 - 0.5 mpa shouldnt it be around 7lbs





LinkBack URL
About LinkBacks
Reply With Quote
Thanks guys! It's been a long road. Fun doing finishing work for sure. Getting the dash ready for paint and some interior trim. Have to do some finish work on the aluminum headliner before...
Stude M5 build