Be very careful of what you are buying. I am a dealer for AFD, (Air Flow Dynamics) heads from Australia. They offer 3 versions of the Cleveland Head in Aluminum and the workmanship is top quality. They have a 2V head for small 351 inch and 302 engines and two four barrel versions. One is the 4VSP with 220 cc intake runners and the other is the 4VR with 245 cc intake runners. All of these heads flow over 300 CFM with the 4VR flowing about 359 CFM at .700 inch lift.

The heads are available bare or complete. I purchase them bare and assemble them with Ferrea Stainless Steel Valves and appropriate Springs etc for the cam being used. The basic heads are $1,595.00 a pair bare. They can be assembled for Street Strip use for about $2,250 and for Competition Use from $2,500 up depending on parts as in Severe Duty Stainless Steel Valves or Titainium.

You may be only wanting Aussie 2bbl Cast Iron Heads though but I wanted to let you and other readers know that these heads are available and are priced very close to what Edelbrock Cleveland 2bbl heads cost that don't do much for the Cleveland in performance. There is a shipping charge to get them here from Australia but I try to bundle several sets in one order when I can to keep the cost down as much as possible. I do have pictures of the heads I can email out if anyone is interested. Please contact me at, mikesspeedparts@aol.com if you are interested as I check that email address several times a day and can only get on here very seldom. Thanks and please let me know if I can help. Mike.