I have no idea on what cam was installed,I was supposed to get a cam card with the motor and did not but all I know is the cam is for a 302 and starts coming in around 2500 RPMs even though I told the builder I wanted one from idle to 4000. I presumed all the rocker arms and push rods were new but since the builder has a questionable reputation who knows as they might be cleaned up used ones and I decided not to spend much money on it right now since I am going back to a Y block,the motor will be going in my 65 custom 500 when it gets pulled from the 55 but will be taking it apart and changing the cam and heads them. I will pull a valve cover and check the rocker arms to see if they are used and put a new set in if they look worn but it will have to wait until it gets pulled before I go any further.