Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: 351c & 400m
          
   
   

Reply To Thread
Results 1 to 8 of 8
  1. #1
    Hombre259's Avatar
    Hombre259 is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2008
    Location
    Out in The Country
    Car Year, Make, Model: 55 Chevy 210-57 Chevy 2 dr wagon-48 Ford
    Posts
    374

    351c & 400m

     



    I am in the process of building a 1955 F-100 and converting it to 4x4. I have available to me two complete donor vehicles both 4x4's one is a Suburaban 350,700r4 combination. The other is a Ford F150 truck 4 speed with a 400M small block. Question is, I have read all of the spin I can find about the Cleveland's but before I lay down the money for the Ford I would like to hear from some of you Blue Oval guys. Plus or minus whats your take on this motor?

    Thanks Roland

    Here's a picture of a 1956 I built 2 years ago it was 460 Powered.
    Attached Images
    Protected people will never know or understand the intensity life can be lived at. To do that you must complettly and totally understand the meaning of the word "DUCK"

  2. #2
    HOSS429's Avatar
    HOSS429 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2007
    Location
    New Market
    Posts
    2,590

    the 400 is ok as a workhorse motor .. you can get 4 barrell intakes and dress up stuff for it .. it just does`nt have a lot of performance potential although a person can make anything scat if you through enuff cash at it ..
    iv`e used up all my sick days at work .. can i call in dead ?

  3. #3
    Daffy427's Avatar
    Daffy427 is offline Banned Visit my Photo Gallery
    Join Date
    Aug 2008
    Location
    Gulfcoast Salvage 34224
    Car Year, Make, Model: The thing in the avatar
    Posts
    517

    From what I have heard the 400 only becomes a perfromance platform if it's stroked. I have never messed with one.. The 351C was a hell of a motor and it's sad the Ford didn't build it longer then they did..
    I remember when hot rods were all home made.

  4. #4
    vara4's Avatar
    vara4 is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2003
    Location
    Pahrump
    Car Year, Make, Model: 1947 International Pick Up
    Posts
    3,187

    Hombre;
    I built one some years ago, and the thing turn in to a monster, in a good way!!!
    We basically just rebuilt the motor and put a performance cam in it, and it came to life.
    This thing would smoke all four tire’s on asphalt .
    When I say a cam, I don’t mean one of these high
    revving cams.
    This cam was for torque or towing/pulling.
    If it was my motor I would have put some close chambered heads off a old Cleveland instead of the open chamber heads that were on it.
    Then I would have put a new intake and carb
    { Holley } and the some headers.
    The compression would have jumped up a couple
    of points to around 10 to 1 the H.P. would have doubled from 200 to 400 something.
    These engines have Lot’s and Lots of potential.
    They just make GOBS and GOBS of H.P. and torque.
    They are really great motors and realy come to life with a few changes. Kurt

  5. #5
    hotrodstude is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2009
    Location
    pendergrass
    Car Year, Make, Model: 2006,ford,f-150,v-6,5-speed manual
    Posts
    245

    i would not use the 351C, its a great profarmance engine but not really suited for trucks.the 400 is a smog engine which means that it is way down on power.however it can be made into a good truck engine by using a after market timing chain set and setting it straight up or 2-4 degress advanced. all the cams come in retarted mode. offy makes a couple of intakes one is is the dual-port with either square or q-jet.just a polished combustion chambers and exhaust ports.

  6. #6
    nitrowarrior's Avatar
    nitrowarrior is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2007
    Location
    Mesa
    Posts
    1,385

    3-11-09...
    What if the "Hokey Pokey" is what it's really all about?

  7. #7
    spur575 is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2009
    Location
    Las Cruces
    Posts
    5

    400s can be torque monsters with a few mods. they have a super long stroke, 4" bore, 4" stroke. I think it's a good motor for a truck.

  8. #8
    nitrowarrior's Avatar
    nitrowarrior is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2007
    Location
    Mesa
    Posts
    1,385

    3-11-09.....
    What if the "Hokey Pokey" is what it's really all about?

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink