Thread: v8 302 canadian prescription?
-
07-19-2007 04:55 AM #1
v8 302 canadian prescription?
friends, alguem would have a basica prescription of harness for an engine v8 302 Canadian, therefore I am mounting one
obs: this engine this original
thanks and forgives my English
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
07-19-2007 05:07 AM #2
Originally Posted by paulo suica
We need more information to help you out
What car is it going into?
What year is it?
What modifications have been made to it, if any?Dave
-
07-19-2007 05:54 AM #3
reply
ok I go to place in one talks back of pick-up ford 1940, that this with 307:1 differential maverick and exchange 3m ford I am wanting to improve the engine in relaçao to the performance and consumption of combustivel I wait that these informaçoes help thanks
-
07-19-2007 06:31 AM #4
Originally Posted by paulo suica
I'm having a bit of problem with your English (but since I can't speak Portuguesa.... ) so I'm going to try to understand what you are saying so please don't get upset with me and others if we ask the same question several times.
You are saying that you have a '40 Ford Pickup with a 302 Ford engine. You also have a Maverick 8" Ford differential with a 3.07 to 1 ratio and a 3 speed Ford transmission. You want to improve the performance - in horsepower and gasoline use (miles or kilometers} per gallon or litre.
First of all - a Maverick(in America) did not have a 3.07:1 differential ratio. It is probably a 2.75, 2.79 or 3.00 which are the most common though there are several other ratios?
Next, what kind of carburator or fuel injection and what type of distributor(points or electronic) is on the engine? What is the approximate year of the engine?
With that kind of information we can start to understand you question better.Dave
-
10-19-2007 09:18 AM #5
new guy needs help with 302?
Hello:
I am new here. Live in Fergus, Ontario.
I am buying a 64/65 Falcon. The 64 has a 2 speed and 170 the 65 has a C4 and 200. I want to go 302 with carb.
I have access to a C4 from a 67 Mustang (if i buy the 64) and a 302 from an 86 Mustang (EFI but has a carb for it).
Will the 86-302 bolt to either of these C4's. Are both C4's 5 bolt? Is the 302 5 or 6 bolt.
I have not seen the 302 yet ( a guy local is selling it) and have not decided which car to buy. Both are nice but prefer 64 trim.
How the motor bolts in may help to decide 64 or 65 for me.
Thanks for any help. Doug
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance