Hi
rightt then the motor is a 351 1973ish cleveland motor with open chamber 2v heads (they will tell you to change them to 4v heads but that out of the question as it means changing manifolds and exhausts )standard pistons and rods may change the cam if some one knows a no. for one (i know bugger all about cam shafts apart from they have bumpy bits on them lol)the blower is a v6/71 on a modified weiand single plane mid hight manifold with a 3/4 inch plate welded to it then a 1/4 inch plate bolted to that to take the 4 bolts on the sides .it does have some form of blow off valves but im not shure if they are home made or not just look like tubes with a square bolt in the end,and the carbs will be 2 x600 edelbrocks
not to sure what fuel pump to run it has an edelbrock mec. one on at the mo but always seems to take its time fireing up with that on dont know if it needs a lectric one on.
the problem im having is that the dizzy dont fit under the blower and i can`t move the blower back because of the fire wall ,so would any other dissy fit or do i need to get one cut to suit of mine is having trouble with fitting a blower on his

Hope some one can come up with some advise
money is tight so GO OUT AND BUY A NEW ONE please

craig