Printable View
ok i got a good question, with one of the older eldelbrock torker manifolds(the one that sets the carb twisted a little, will my standard mustang throttle linkage still work.... I've got the alluminum rod linkage, not the cable linkage...
edit: I've included a picture of the manifold to help...
http://i6.photobucket.com/albums/y21...als/fe_1_b.jpg
Should have included a pic of your linkage instead. I like the original Torkers MUCH better than the Torker II. I have one on my '67 Ranchero. I built the linkage for it but I'm betting if yours has a little more adjustment left in it and with a slight bend it will work fine. If not, it's a snap to make another linkage.
thanks for the info, i just ended up buying a brand new airgap and 600cfm performer carb, hopefully they'll run good with my stock HO heads and hydraulic roller cam.... decided to start upgrading the engine while its out of the stang... why not eh?