what does it fit ????

Ok, here's one for you engine techs. I have a 289 engine with a 5 bolt bellhousing, I believe this means it is '64 1/2 or older. I like cubic inches and am not into the "original numbers correct" gig at all. I would like to see these parts go to someone who needs them for a "correct" type car. The engine is complete minus the carb. I have all the tin for the engine, including the air cleaner. I also have the flywheel and harmonic balancer (3 bolt pulleys)

Bock--C40E 6015C Date Code 3J12

Heads--C3AE Date Code 3J17

Intake C30E 9425E Date Code 3E15--- Factory cast iron 4 barrell

My questions are:

1. What is it "correct" for??

2. What kind of value does it have to a collector???

Thanks in advance for the help. Been saving this one for years, but could use some extra $$$$ to dump into the Ranchero and the Coupe.

Dave

Thanks Bill. Appreciate the help. That is pretty much what I had figured out, helps to get a bit of verification from someone in the know.