securedownload-1.jpegsecuredownload-2.jpegGreat information. The rockers seem pretty uniform. Should I be concerned about the scoring / scratches on the shaft?

For the rockers,
I am going to run these through the vibratory bowl one more time and clean the oil passages. Should I run a hone through them?

For the shaft, should I remove the plugs by drilling one side and running a dowel through the shaft? Do you recommend a hot tank or a rifle cleaning brush?

I kind of want to buy one of those old school valve resurfacers to reface the rocker pads. Has anyone had luck with those machines?

Thanks again!