Thread: ford 361 rocker help

Tweet

securedownload-1.jpegsecuredownload-2.jpegGreat information. The rockers seem pretty uniform. Should I be concerned about the scoring / scratches on the shaft?

For the rockers,
I am going to run these through the vibratory bowl one more time and clean the oil passages. Should I run a hone through them?

For the shaft, should I remove the plugs by drilling one side and running a dowel through the shaft? Do you recommend a hot tank or a rifle cleaning brush?

I kind of want to buy one of those old school valve resurfacers to reface the rocker pads. Has anyone had luck with those machines?

Thanks again!

Originally Posted by 58ranger

Attachment 56822Attachment 56821

I kind of want to buy one of those old school valve resurfacers to reface the rocker pads. Has anyone had luck with those machines?

Thanks again!

in the picture you just posted it looks like you have adjustable rockers .. yet in your other pictures thay are not .. can you post a better picture of the rocker shaft in the background .

if you remove any material from the rocker pads on a non adjustable type set up you will affect the valve adjustment ..