Thread: 390 FE ford overheating
Results 1 to 8 of 8
LinkBack URL
About LinkBacksThreaded View
-
03-18-2010 03:23 PM #1
CHR Member
- Join Date
- Mar 2010
- Location
- Sullivan
- Posts
- 4
390 FE ford overheating
Hello Fellows
I just finish re-builting my 390. It have a performance RPM edelbrock complete kit, manifold dual plane, camshaft, timing chain, hydraulic lifter. I have compcam roller rockers. MSD ignition system and a 3 core aluminiun radiator. It have and edelbrock carburator. I change all the gaskets and make a flushing to the block. I make my brakedown just as Edelbrock suggested. It has a high flow oil pump. And the water pump is new as well.
When I start my engine and let it on idle, when 20 minutes pass, the temperature rise to 210, that I think is to hot.
It is really too hot or is normal this temp.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
This site is up more often lately, but very little traffic.
Dead!