wiring diagrams ???

i decided i would go with a reman electronic distributor and stock ignition module to convert my 58 to electronic ignition. Does anybody know where I can get a wiring diagram to wire it in correctly? The dist. and mod are for a 75 f150

Used to be a company that advertised on eBay selling schematics for old cars... They were fairly decent on price, and came laminated.... Not a bad idea for a schematic that's going to be out in the shop.... Don't remember their name at all, just that they were on eBay---might want to look there!

This is for a Mustang but most are all the same, that came of an Inliners Board...joe

http://www.inliners.org/tech/images/durasparkwiring.jpg
The stock ignition wiring diagram looks daunting but all of the wiring is contained within the harness. This leaves only two connections which have to be made: a red
wire which is connected to a switched 12V source and a white wire which goes to the start terminal of the ignition switch. The white wire is optional. When used it
retards the spark a couple of degrees to reduce the load on the starter (an enterprising hot rodder might hook this up to a nitrous switch to retard the spark when the
juice is on). When selecting the module, the one to ask for is the one with a "blue strain relief".

Thanks toomany that is exactly what i needed. I love this forum. Thanks to you too Dave I will look on ebay too to see what else i can find for my project. I never know what I may do next. My goal for right now is get the fairlane to a point I can drive it.