i have a 390 engine, 600cfm carb rejetted for 650. electric fuel pump. ive had this carb on my truck since ive owned it. its a edel brock/weber square bore, 1405 and thats all i know.. when the engine is running while looking into the throat of the carb the fuel doesnt "spray" from the "circular things" (sorry brain fart its been awhile) in the primary valves it drips... the accelerator jets have no visible fuel coming out of them when engine is on. while engine is off the accelerator jets have visible fuel squirting out and nothing from the those circle things... sorry i just cant remember the names of things.. ive torn the carb apart and cant find any gunk in the bowls, any and all orifices. both of my fuel filters are good and clean, easy to blow through and just replaced the first one before the pump since i was doing a pump replacement. the floats move freely. any ideas, the timing is correct for running wise, i dont think it could be in the valve terrain but thought it could be but im not hearing any abnormal noise besides the one you hear when there is no fuel.....