Quote Originally Posted by willowbilly3
I would do some research before wading in. Maybe go over to the FE forums and lurk a little. The reason I say this is because I remember reading some fitment problems with the roller rockers on the Edelbrock heads and if you are planning on possibly using them at some point you might want to know what fits what. Those C8 heads do not have hard seats either. As far as I know the D2 heads had them first.
For all I knowof difference betw. Edels and stock heads is you better use studs at the rockerstands on alu heads or you might strip the threads,also you better use stands that fits your heads if you run lowriser or highrise heads, is there more?
I got hard seats installed in my C8ts so theyre OK. in that matter.

How come I can get a Complete set of Rollerrockers including shafts, stands with end stands ,spacers ,studs and adjusters, and lube. for $499.96
That is Crane Sportsman Series i found them on Epay,Thats 300 bucks less than Dove Comp and Erson,
Crane aint crap what I know, unless ping & pong makes their stuff nowadays? Should someone talk me out of gettin them? This 390 aint goin over 6000 rpm