ok i have a 1965 galaxie with a 352 in it i have pulled the motor. it ran when i took it out of the car. i did a compression test and the cylinders varied greatly in compression, the range was from a low of 70psi. to a high of 120psi. so the motor needs new piston rings. i have honed the cylinder walls and i am going to have the block boiled out. i really dont want to have to bore it out to rebuild it. the guy that had the car before me just put in stock size rings. my plan is just to put slightly oversized rings in it. im gonna have the machine shop tell me what they think but if my plan will work i was wondering if any of u guys knew where i could get piston rings, camshaft bearings, and rod bearings for a decent price/ everywhere i have looked has been pretty expensive (compared to my chevy) i just want a daily driver not a race car so i just want it to run good and be dependable. all the piston rings i have looked at have been like $170 i was looking to spend more like $100 so i have some money left over for bearings. like i said i am on a really tight budget so any sugestions would help me alot
thanks guys
Tyler