I'm looking for the correct way of adjusting the Rockers on my FE.
I've tried several different ways and they never get quite!
I think, not sure, but:
I turned the motor over till the Exhaust Valve "just starts" to open and I adjusted the Intake. I backed off the adjuster until the rocker was loose. I then turned the pushrod as I tightened the adjustment down, till I felt resistance. I then turned the adjuster, 1 full turn.
I turned the motor over till the Intake Valve "just starts" to close and adjusted the Exhaust.
Someone told me that I wasn't doing the Exhaust right?! They told me to watch the valve and when "it" CLOSES, meaning at the seat, adjust the Exhaust.
I think the "someone" is correct, cause the other way doesn't work.
Any Help Here, Would be GREAT! Thanks, Ray