Thread: 360 torque monster
Hybrid View
-
01-10-2005 07:12 PM #1
360 torque monster
how much valve lift can a 360 take?
I am thinking of a 194D cam 110 lobe seperation
I think mabe .800" lift mabe be possible
get some headers, Edlebrock 600, pertronix and flamethrower coil should make for a dependable and mean Monster with some serous issues, hopefully in the 370+ torque range and 200 hp.
This should be enough for a light F-100 or make for a real stout Early Bronco that will rip stock axils apart before "not" making it up the mountian slope.Looking for a '67-'75 Ford 4x4, 4 speed pickup
-
01-12-2005 08:15 PM #2
.800 lift? You're kidding, right? Not even likely. I don't think the heads to allow it. I'd be really skeptical at .540 but would definately clearance check any cam that runs over .500 lift.
And a 194 Duration cam with .800 lift.... sure, ok. I don't even think a roller lifter could work that.... or could it???Dan Ouellette
'25 T C-Cab
'47 Ford Coupe
'53 Ford Crestline
'53 Ford Mainline
-And 8 more Fords and 2 Mopars
-
01-12-2005 09:14 PM #3
I have heard of .700" lift out of a 300 six at ford six performance index owned by a guy with the screen name "frenchtown flyer".
I question
1. spance between piston and top of combustion hamber
2 how much the head will allow
I have heard of a 300 with headers, offy intake, holley 450 cfm 4 barrel, 240 head, electronic ignition making 300 hp at 5500 rpm and over 400 lbs of torque at 2500 rpm if I remember correct.
I wonder what a 360 can do with 9.5:1 comp, 4 barrel, 230 D @ .50 cam , headers.Looking for a '67-'75 Ford 4x4, 4 speed pickup
Well I've sure gotten old too so don't worry about it! I've had two bypass surgeries, new knees, fought prostate, cancer and diabetes. I'm half blind, can't hear anything quieter than a jet engine,...
the Official CHR joke page duel