Printable View
Ok; so i got my oil pan back on with a new gasket,
now i'm ready to install a new pre '70 timing chain &
gear set in to my '77 460 BB (As i've learned from this forum)
Question here is..whats the proper sequence of events,
from the chain & gears -to- timing the engine??
Just align the dots on the cam and crank gear, put the engine back together and time the engine to spec.... Good plan using the early gears as the later model engines had the cam retarded in the engine....
retarded cams make me nervous .... umphhhh :rolleyes:Quote:
Originally Posted by Dave Severson
You will notice a nice seat of the pants kick with that new gear and chainset. Easy installation though don't forget the fuel pump eccentric and oil slinger.
Denny - :confused:I still don't know why you advocate pulling the motor. He figured out the pan and the timing set change out is easy once the water pump is off and a heluva lot easier then pulling the engine and risking breaking exhaust manifold to pipe bolts or even manifolds, drizzling transmission oil, power steering fluid and even dumping gas just to name a few aches and pains. A '70's Ford P/U has lots of room to work to even change out bearings once the pan is off:HMMM: