Printable View
I have in my possesion a 5.4 Liter ford engine that came out of a 2002 f-250 it has fuel injection with the 2wd transmission attached to it. The engine has around 150,000 miles anyone have any idea the value of it. Also could i put an intake and a carb and do away with the fuel injection or is that not possible.
Flattie53
possible but you need a stand alone ignition controller for the coil packs. I think MSD sells 1, not shure. trans is also another obstacle ( computer controlled ). not shure on value, but probably somewhere in the 2-4k range
There's a company making the carb intake and set up for the 5.4's, though unless you are going all out competition on it, why would you want to do away with the EFI???? They work great!!! The ecm, with a tuneup, will support in excess of 500 hp with a blower on it.....
I would like to use it but the transmission im not sure of i think i would need the rearend with the computer plug in to make it shift correct but also how would you wire this thing up in the 53 ford pickup thats the part im really lost on. can you get a wiring harness for this? Hmmm you got me thinkin blower 500hp what to do what to do!!
there are harnesses available, you should try to get the harness from the truck it came from, or a similar truck complete with the ECM. I've found a lot of good information on these engines at www.modularfords.com . FAST and a few other companies have all the electronic goodies.