Thread: 69 307 timing/HP?
-
09-06-2004 12:58 PM #1
69 307 timing/HP?
Here is what i have..69 307 (original motor to my truck)..bored .30 over,flat top 4 valve relief pistons,447/447 cam,edelbrock dual plane 4bbl intake w/600cfm edelbrock carb,heads are cast iron with 194/150 intake and exaust valves not ported or polished.Went with HEI Accell distributer vs points. And hedders finish it off...
First i want to know what the timing should be set at,and if it is different with the HEI than the points,then i would like to get an idea of what HP would be with the mods i have made,assuming the stock 307 was about 225HP..Any help is appreciated..Matty out..........
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
So installing the trex bed wood got me thinking about all the heat from the exhaust and the possible melting of the wood. Also noticed the floor on the passenger side getting hot on a warm day. So...
Stude M5 build