COP Testing

On the late model 2 seater Thunderbirds, the coil on plug units have a large failure problem. Most are fixed by replacement and often good units are replaced to avoid future work. My question is how do you test a COP unit? What measurements can be taken and what are the range of good data numbers? On my Mark VIII Lincoln with the 280hp motor, can I look for the same numbers or do different coils have different values?
I am looking for the true Mechanic's answer on testing rather than the drivers method of replacement or substution. Can you help?

The best suggestion I could offer is to compare the readings from a bad coil to a good coil. That will give you a reference or base line

A coil is only a step up transformer, so either the windings are shorted or open. Numbers for resistance will be close, shorted will be the same, likewise an open will also read the same.

Heres an article that gives Ford Cop checkout, completely useless procedure though unless you have the famous Ford breakout box.
My Mitchell repair stuff has nothing on COP coil specs or testing.
I would suspect since they have no specs its because no one wants to pay me my 99.50 per hour to test a coil X 8.:). I know on Lincolns the book says if you have 1 bad one to replace all 8,thats a tuff sale. Heck if a Ford comes in with a miss fire all I need to know is which cylinder, pop the coil out,inspect the boot if its o.k. look at the plug and throw a new coil on it. Such a common problem it doesn't require a lot of testing.
Coil On Plug Test