Printable View
I've got Weiand 2x4 with a pair of 600 Holleys on top....
Both have manual chokes, but neither are connected.
They're mounted inline with a direct main linkage (not progressive)
Does anyone make a linkage that will connect both manual choke arms so I can use a single cable to control both?
Rick
no but just make one all you need is a solid link there in line. i had 2x4 and some milled off chokes and some 1050 and 1150 they never had any thing . it was never was that bad with out the chokes let it warm up ? less you running it in the cold weather
are you having starting problems .. my 4.3 V6 chevy pinto will absolutely not start without choking it .. manually that is .. wish now i`d bought an electric one
I have no problem making one, but I want to see my options and use whatever has the cleanest look :oQuote:
Originally Posted by pat mccarthy
With the choke set (on either one or both), she fires up instantly with my arm through the window :cool:Quote:
Originally Posted by HOSS429
Without the choke, she cranks for a few seconds before coughing and I gotta play with the pedal before she finally gets going :(
well yep it will till warm .my all alum 632 with no choke on ex cross over to warm the intake its still not to bad . as for you link .i would thinking any very small rod ends and some ss rod tap it thread the rod ends on .you may want a lite spring to help push it shut when you push in the choke doneQuote:
Originally Posted by 98 SNAKE EATER
If I remember correctly, doesn't the front carb feed the front four cylinders and the rear carb feed the rear four cylinders? For that reason, you cannot run progressive linkage.