Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: asian pain
          
   
   

Reply To Thread
Results 1 to 2 of 2
  1. #1
    raylisa32@front is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2007
    Location
    kingman
    Posts
    5

    asian pain

     



    I'm building a track style car, and I'm using a 1984 Toyota 22r engine. I've built a intake that will run 2 holley 2 bbl. carbs. This engine was f.i, and has no vac advance can on dist, and is electronic ignition fired by an ignitor bolted to outside of coil. My question is how to wire ignitor into system, or if anyone knows of a way to do away with it, and run stock coil?

  2. #2
    Bob Parmenter's Avatar
    Bob Parmenter is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2001
    Location
    Salado
    Car Year, Make, Model: 32, 40 Fords,
    Posts
    10,844

    If you look for a carbed version you should find a vac adv distributor, PN 19100 is one example.
    Your Uncle Bob, Senior Geezer Curmudgeon

    It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.

    Luck occurs when preparation and opportunity converge.

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink