Thread: carb problems

Tweet

well here are a couple pictures, the pump discharge needle valve i can see , but am not sure how to get it out. also i think that the odds of both primary and secondary check balls lodging shut is high, but anything is possible. is there a check ball that controls both primary and secondary main feed? when i removed the bowls i pumped the accel pumps and plenty of fuel shot a good distance out. if you want any more shots let me know and i will shoot them, and of coarse i had a holley 4150 book but loaned it out and it is now missing in action, thanks in advance for your help.

thanks denny you are a nerve saver, i did all you said and it works like a champ. my needles would not fall out but when i sprayed carb cleaner through the passages they fell out. also the 3rd jet down in the pic was chewed up from someone and a screwdriver, i cleared it with weld wire to open it back up, many thanks again!