Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: bog/backfire
          
   
   

Results 1 to 15 of 23

Threaded View

  1. #5
    lit549 is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2007
    Location
    sherman
    Posts
    25

    after i got it back from mechanic i played with the vac adv hose(switched it back to ported just to see what it would do it was just like before it would spit out carb so i put it back to man vac and reset air fuel because he set it to where it was running really rough when i did it ran way smoother but spit and hesitated again.choke is set at middle notch on housing, it comes off late.i havent checked where he has timing but i think he set it by ear.something isnt right just havent found it also i checked for vac leak there is not one.intake thats on it is 1500-6500rpm i ordered a idle-5500 performer eps something more around low end torque could the int on it now be too much??it has no offline torque , by the way its in s-10 it should hall!!!sorry so long but im really frustrated?!i really aprreciate any advice yall can give. thanks
    Last edited by lit549; 03-02-2007 at 07:40 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink