Thread: Trouble idling.
Threaded View
-
12-01-2006 01:28 PM #1
Trouble idling.
Hey guys. I have a SBC 350, and 350 Auto trans. Holley carb #3310 (4160) carb. The car idles fine in park but falls on it's face when put in drive. The cam card is attached. I have checked for vaccum leakes and have adjusted the float level. I am stumped. When I set the the idle speed in park I am at about 1300 rpms then I put it in drive and it goes to 600-700 rpms or die. I do not know what else to check. I have played with the mixture screws and my timing is set at 12 BTDC. What am I overlooking? Thanks in advance.
Could it be a 10114182? If so, it is a Gen V 454, 4 bolt 1991 (or later). Hope that helps..
GM Engine de-coding