Thread: Timing

Tweet

Originally Posted by Steel Warrior

Is there any way to set the timing on a 350 SB with out seeing the timing marks. I have a 38 Chevy and with the alt, power steering and nose in the way. I can't see the marks at all. I know I'm close by ear. Just want it better. Thanks!

if you know where the top dead center is then you can put the timing mark anywhere you want to. get the motor on TDC ,and if you want put a mark on the bottom, top or side of the HB and mount a timing tab to the motor that lines up with the mark. using an adv. timing light set the timing where ever you want. you don't have to use factory timing marks.

Originally Posted by DennyW

You got it Mike. I have done that a time or 2. Works great !

i know, but i'm not sure if he will understand what i said. if you don't Steel Warrior, just ask and i'll try to clear it up for you.

Thanks, I will try to get top dead center and work from there. I can get to the bottom of the harmonic balancer. Just can't see anything even with the alt and belt off. Because the power steering pump is in the way. I would have to pull the nose and fender to get that off. So, I hope this works. Thanks again!!