Hybrid View
-
11-26-2006 09:20 PM #1
Timing
Is there any way to set the timing on a 350 SB with out seeing the timing marks. I have a 38 Chevy and with the alt, power steering and nose in the way. I can't see the marks at all. I know I'm close by ear. Just want it better. Thanks!
-
11-27-2006 04:52 AM #2
I had a 38 chevy with all the extra goodies on it and it was a pain to see what you were doing I agree. You could remove the belts and move the alt and A/C comp out of the way to set the timing. You shouldn't need to run it long enough to hurt anything if your just going to set it and it is already running.Charlie
Lovin' what I do and doing what I love
Some guys can fix broken NO ONE can fix STUPID
W8AMR
http://fishertrains94.webs.com/
Christian in training
-
11-27-2006 06:35 AM #3
Originally Posted by Steel WarriorMike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
-
11-27-2006 06:45 AM #4
Originally Posted by DennyWMike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
-
11-27-2006 09:15 PM #5
Timing
Thanks, I will try to get top dead center and work from there. I can get to the bottom of the harmonic balancer. Just can't see anything even with the alt and belt off. Because the power steering pump is in the way. I would have to pull the nose and fender to get that off. So, I hope this works. Thanks again!!
The Australians have finally discovered the origin of the word 'Vegan.' Apparently it's an old Aboriginal word for 'Bad Hunter.'
the Official CHR joke page duel