Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Holley or Edelbrock Carb
          
   
   

Reply To Thread
Page 2 of 2 FirstFirst 1 2
Results 16 to 30 of 30
  1. #16
    lt1s10's Avatar
    lt1s10 is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    rustburg,
    Car Year, Make, Model: 1997 CHEVY.S10 LT1-350
    Posts
    4,093

    I didn't want to say that, I thought I had the only carb. that could talk, and nobody would believe me.
    Mike
    check my home page out!!!
    http://hometown.aol.com/kanhandco2/index.html




  2. #17
    lt1s10's Avatar
    lt1s10 is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    rustburg,
    Car Year, Make, Model: 1997 CHEVY.S10 LT1-350
    Posts
    4,093

    or wet your plugs.
    Last edited by lt1s10; 06-30-2006 at 08:59 PM.
    Mike
    check my home page out!!!
    http://hometown.aol.com/kanhandco2/index.html




  3. #18
    lt1s10's Avatar
    lt1s10 is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    rustburg,
    Car Year, Make, Model: 1997 CHEVY.S10 LT1-350
    Posts
    4,093

    mine can whistle a tune sometimes.
    Mike
    check my home page out!!!
    http://hometown.aol.com/kanhandco2/index.html




  4. #19
    Gerald Streeks's Avatar
    Gerald Streeks is offline Reverse Induction WOW! Visit my Photo Gallery
    Join Date
    Apr 2006
    Location
    Seaford
    Car Year, Make, Model: 73 C20 Chevrolet & 1984 GMC Caballero
    Posts
    129

    Hey, what about the Predators doesn't anybody care about those?
    If I knew anything I'd be dangerous.

  5. #20
    lt1s10's Avatar
    lt1s10 is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    rustburg,
    Car Year, Make, Model: 1997 CHEVY.S10 LT1-350
    Posts
    4,093

    Quote Originally Posted by Gerald Streeks
    Hey, what about the Predators doesn't anybody care about those?
    never ran one on the st., but used them on my drag car and mod. round track. worked great.
    Mike
    check my home page out!!!
    http://hometown.aol.com/kanhandco2/index.html




  6. #21
    Was_II's Avatar
    Was_II is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2004
    Location
    Seattle
    Car Year, Make, Model: 1978 Mustang II
    Posts
    133

    I am throwing down and buying a pair of Eddys to replace my Holley 390's. The car was idling weird when I was warming her up just now. I shut if off, took off the scoop and air cleaners, checked vacuum lines, checked the chokes (one of the butterflies had stuck closed a couple of weeks ago), everything looked good.

    Fired it up, dropped it into reverse, and BOOM!! Engine dies, backfire and flames. Big flames.

    Screw this.

    When Holleys run right, they run killer. I LOVE mine when they run right. But they have no sense of humor. I'm getting a pair of Eddy 1403's when I get my bonus check this month.
    Dual Quad Tunnel Rammed "Are you INSANE?" 5.0L H.O. '78 Mustang II

    http://www.cardomain.com/ride/803178

  7. #22
    hotroddaddy's Avatar
    hotroddaddy is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2005
    Location
    jacksonville
    Car Year, Make, Model: 53 Ford Panel truck/59 tbird/73 VW Thing
    Posts
    1,656

    I just went today and bought a edlebrock,gonna put it on tonight after i put my fresh built heads on, hope it works out of the box like they claim

  8. #23
    1JohnnyO is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2004
    Location
    Hagaman
    Car Year, Make, Model: 71 Chevelle SS, 67 Camaro
    Posts
    404

    I dont think any carb will work perfectly 'out of the box', mainly because all engines are a little different. Even two engines, built identically, will need to be tuned a little differently. But your Eddy should be OK as is...if anything, you might have to adjust the idle mixture screws a bit (read instructions), but otherwise it should be OK. Which one did you get?
    When your dreams turn to dust, Vacuum!

  9. #24
    Firechicken's Avatar
    Firechicken is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2004
    Location
    University Place
    Car Year, Make, Model: 55 Chevy Cameo, 68 Pontiac Firebird
    Posts
    400

    Quote Originally Posted by Crowbie
    Whats the deal with all the cars I see with Holley's and just a few with edelbrock carbs? I mean did I choose the wrong carb or something?

    I've always heard an edelbrock will take more abuse than a holley and thats all I know!!

    Please someone shed some light on this for me so I can choose my next carb whenever I decide to build another motor!

    Oh and has anyone ever heard of piston rings not seating after 5000 miles? Because thats what mine are doing in a .30 over 350 chevy, rods installed in order, new pistons, lifters, cam, crank, oil pump, you name it, and the compression test with heavy weight oil tells me its the rings soooo .. am I just very unlucky or is this a sometimes common issue?

    The 'Brock vs. Holley is IMHO part preference and part application. As mentioned before, typically Edelbrocks are not really the racer's choice. I probably wouldn't choose an Edelbrock carb if I was going to race the car I was putting it in. Hell, even Vic Edelbrock doesn't run an Edelbrock carb on his old Mustang GT-500. So, in that case, (racing) if my only choices were Edelbrock or Holley I'd go with a Holley. But, that doesn't mean the Edelbrocks aren't good carbs. For a daily driver, between the two I'd personally take the Holley....and throw it as far as I could and then install an Edelbrock EVERY time.

    I prefer installing carbs, tuning them ONCE and then forgetting about them......forever. I NEVER had that luxury with the Holley's I've owned. They seemed to be a constant pain in the a**. The Edelbrocks I have installed have been a quick easy tune right out of the box, change the jets here, or metering rods there, and then I never had to touch them again...just the way I like it.

    Perhaps it's just simply because I really suck at tuning a Holley carb, if that's the case, I'm fine with it. I'll accept it as a limitation of mine and move on. (I'm not a plumber either...that's another one I have just accepted as fact) I've always seemed to be able to get the Holley's to produce good power...they just seemed to lose their tune to often for me.

    Now, in fairness, to put some perspective to this last statement so that it doesn't sound more conclusive than it actually is, I've only personally owned 3 Holleys and 2 Edelbrocks. I have installed and tuned a handful of both for other people as well, but really couldn't tell you how well any of them are running nowadays.

    So thats about it from me on the whole Edelbrock vs. Holley thing.

    As for the ring seating question after 5K miles, how was the motor broke in after it was rebuilt? Is it "blowing by" through the carb, or ???? In other words, what was the actual condition that prompted you to put a compression tester on it to begin with?

    Cheers,
    Firechicken
    Sometimes NOW are the "good old days"...

  10. #25
    kitz's Avatar
    kitz is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    Austin
    Car Year, Make, Model: 32 Roadster, BBC
    Posts
    962

    In any case, unless you are building a freak beast engine, the carb you put on it, if properly sized for your engine's output, will probably be pretty close right out of the box! Think about how many people really read plugs and make jet edjustments etc on their carbs on the street. Usually you don't need to, and if there really are problems, in general they are often really not the poor carb's fault anyway, Holley, Edelbrock or other

    That said, for this post I say Holley rules

    Kitz
    Jon Kitzmiller, MSME, PhD EE, 32 Ford Hiboy Roadster, Cornhusker frame, Heidts IFS/IRS, 3.50 Posi, Lone Star body, Lone Star/Kitz internal frame, ZZ502/550, TH400

  11. #26
    hotroddaddy's Avatar
    hotroddaddy is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2005
    Location
    jacksonville
    Car Year, Make, Model: 53 Ford Panel truck/59 tbird/73 VW Thing
    Posts
    1,656

    Well i got it all together, it started right up woo hoo, seems to run fine, but then again like denny stated, i dont know anything about carb tuning, i did not check the model #, but it is a 600cfm

  12. #27
    grifo7's Avatar
    grifo7 is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2006
    Location
    Twickenham
    Car Year, Make, Model: 68 Iso Grifo 7 Liter,
    Posts
    62

    I've had some experience of Holleys and am quite new to Edelbrocks.
    Best Holley I've had was custom built for my Chevy 454 by Chuck Nuytten out of Dallas. 750 double-pumper, choke horn removed, airflow improved to 890cfm max, 4-corner idle, etc. Ran great right off, never needed to touch it, except tweak up the bowl screws once in a while. I may change the power valve soon, and I'm not looking forward to messing with scraping old gaskets off etc.
    Have just fitted my first Edelbrock to a Ford 351C, and after reading the instructions, decided to richen it up a stage or two on cruise and power. This was achieved by a simple rod change in under 5 minutes, not a drop of fuel was spilt - impressed the hell out of me!
    Chris

  13. #28
    gassersrule_196's Avatar
    gassersrule_196 is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2004
    Location
    Lawrence
    Posts
    3,261

    all i can say is go to the track u might find 1 or 2 eddy's <the street cars. vs the rest holleys or proforms, predators etc

  14. #29
    C9x's Avatar
    C9x
    C9x is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2004
    Location
    N/W Arizona
    Car Year, Make, Model: Deuce Highboy roadster
    Posts
    1,174

    So . . . whadda ya think about running a 600 cfm smog Holley - w/vacuum secondaries - on the rear of a dual quad setup along with an Edelbrock 750 cfm on the front?

    Progressive linkage with the rear carb - Holley - as the primary.

    Best of both worlds for street use and measurements show it's a do-able deal.
    C9

  15. #30
    gassersrule_196's Avatar
    gassersrule_196 is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2004
    Location
    Lawrence
    Posts
    3,261

    that would be a pain in the a*s to keep in tune.

Reply To Thread
Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink