Thread: About vacuum sources and timing
Results 1 to 14 of 14
Threaded View
-
05-29-2006 09:15 PM #6
well i tried it tonight and hooked the dist vacume pot to manifold vacume, engine speeds up about 1000 rpm was able to set back idle and also set idle screws in about 2 turns. car idles much smoother down to 400 rpm !! and it seems to respond better while bliping the throtttle against the brake.itll break the tires loose just barely off idle wet outside tonight but will see what it does once out on the road. it sounds a lot better now. running advance is about 25 degrees ,initial 10 deg and mechanical goes from there
ill let you know tomorrow how it turns out re pinging etc





LinkBack URL
About LinkBacks
Reply With Quote
It would be nice if this up and down crap would cease.
Back online