4.3 wont start need help

ok when i was pulling out my trans i pulled the distributor and forgot about it and turned the crank to unbolt the torque converter so after the new trans was in i found TDC and made sure the rotor was pointin to the no.1 cylinder wire. and obviously it wont start, i bought a new cap and rotor and still nothin. its a 4.3 TBI in a 92 truck. anyone have any idea why it wont evem fire?

pull a plug and crank it with the wire connected to see if your getting any spark... once you've verified that, then we'll get to making sure your distributor is set right

The dist. is a half a turn out.

ok good idea but its gotta wait til tommorow. R pope did you mean like turn the rotor 180 degrees?