Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: carb kit
          
   
   

Reply To Thread
Results 1 to 15 of 15
  1. #1
    mad hooker is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2005
    Location
    sunnyvale
    Car Year, Make, Model: 1969 ss el camino
    Posts
    154

    carb kit

     



    hey guys, heres my prob. i yanked the 350 out of my ride and im cleaning parts. heres the thing i have a 600 cfm 4 bbl holly. its still good but its filthy and i want to put a new rebuild on it but im worried i might ruin it,being that carbs are delicate aand i dont know that much about carbs, what is my best bet without having to buy another carb?

  2. #2
    mad hooker is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2005
    Location
    sunnyvale
    Car Year, Make, Model: 1969 ss el camino
    Posts
    154

    yeah i think its a good idea to, figuring i dont wanna fork out another 3 bills for a new one. what should i expect to pay?
    Last edited by mad hooker; 11-28-2005 at 08:54 AM.

  3. #3
    mad hooker is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2005
    Location
    sunnyvale
    Car Year, Make, Model: 1969 ss el camino
    Posts
    154

    oh man that a good deal! wish i had the money for that right now! damn it!!! well i guess i have no choice but too have it rebuilt, man what a burn, maybe ill get lucky and find another deal on ebay. thanks bro/

  4. #4
    thesals's Avatar
    thesals is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2004
    Location
    san diego
    Car Year, Make, Model: 66 mustangFB, 69 econline Drag Van
    Posts
    1,527

    fuel system parts will rebuild your 4bbl for about $200 and tune it to your car on a dyno for an extra $50.... i dont know if they have one where you live... but they are nation wide
    just because your car is faster, doesn't mean i cant outdrive you... give me a curvy mountain road and i'll beat you any day

  5. #5
    NTFDAY's Avatar
    NTFDAY is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2003
    Location
    Springfield
    Car Year, Make, Model: '66 Mustang, 76 Corvette
    Posts
    5,333

    Originally posted by mad hooker
    oh man that a good deal! wish i had the money for that right now! damn it!!! well i guess i have no choice but too have it rebuilt, man what a burn, maybe ill get lucky and find another deal on ebay. thanks bro/
    Rebuilding a Holley is about as easy as it gets. There are many books on the subject, some good choices at www.summit.com and they also sell the rebuilding kits. Getting the parts clean and free of debris is the main obstacle. All passages, no matter how large, must be thoroughly blown out.
    Ken Thomas
    NoT FaDe AwaY and the music didn't die
    The simplest road is usually the last one sought
    Wild Willie & AA/FA's The greatest show in drag racing

  6. #6
    73RS's Avatar
    73RS is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2004
    Location
    Gonzales
    Car Year, Make, Model: 73 camaro RS
    Posts
    252

    I agree with NTFDay, Holleys are the easiest to rebuild, and theres not too many things that are delicate in them either, probably the most delicate parts are the accelerator pump diaphram and power valve. There aren't too many parts in there to confuse you. Rebuild kits aren' that much.

  7. #7
    NTFDAY's Avatar
    NTFDAY is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2003
    Location
    Springfield
    Car Year, Make, Model: '66 Mustang, 76 Corvette
    Posts
    5,333

    Thumbs up

     



    Originally posted by DennyW
    That's very true guys, theres only a few things that he wouldn't know, but probably wouldn't need in his case. It sounded like he wanted something ready to go, and one that had been rebuilt and run in and set, for that price, sounded pretty good. But, by all means, I think he should buy a good book, and try to do one. Nothing like doing one to understand what's going on.
    Learn the 6 circuits, and you will always remember what you want to do, because you know which circuit it happens in, if there is a problem.

    Well said
    Ken Thomas
    NoT FaDe AwaY and the music didn't die
    The simplest road is usually the last one sought
    Wild Willie & AA/FA's The greatest show in drag racing

  8. #8
    mad hooker is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2005
    Location
    sunnyvale
    Car Year, Make, Model: 1969 ss el camino
    Posts
    154

    yeah, i could go and get abook and try it out , and learn the parts but then if i screw up im screwed......

  9. #9
    daveid's Avatar
    daveid is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2005
    Location
    n
    Posts
    157

    Ya, i agree that you should try to rebuild it yourself. Im new to all this stuff and i took mine apart and changed the jets and power valves and so furth and didnt think i was doing it right so i sent it out to be professionally built and it comes to find out, i knew what i was doing and wasted about 300 bux for it.

  10. #10
    thesals's Avatar
    thesals is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2004
    Location
    san diego
    Car Year, Make, Model: 66 mustangFB, 69 econline Drag Van
    Posts
    1,527

    rebuilding a carb really isn't that hard.... i never tried it before, had one go out on my car and rebuilt it in no time.... minus the soak time.... takes about an hour to do a thorough job
    just because your car is faster, doesn't mean i cant outdrive you... give me a curvy mountain road and i'll beat you any day

  11. #11
    R Pope is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2005
    Location
    Eston
    Posts
    2,270

    Sure, go for it, thats how you learn! One caution--don't overtighten the four screws on each float bowl, you can warp the carb body and cause all kinds of problems. It can be filed flat again, but better not to do it in the first place. You should check the body with a straightedge when its apart anyway.

  12. #12
    mad hooker is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2005
    Location
    sunnyvale
    Car Year, Make, Model: 1969 ss el camino
    Posts
    154

    hmm yeah you guys are right, i should try it to learn and all, i think ill go buy a book and give it a shot, but say if i do ruin something how would i now when i try to run it besides the engine not kicking over? or running it without not knowing somethings wrong with it? ah what the hell, ill do it. thanks guys.

  13. #13
    daveid's Avatar
    daveid is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2005
    Location
    n
    Posts
    157

    just do the rebuild and then when you put it back on, of course dont fire it up. Let the fuel pump run and get gas in and then make sure of no leaks. Then after that is the hard part of trail and error and also, trying to determain what you think is the best. Thats the hard part.

  14. #14
    NTFDAY's Avatar
    NTFDAY is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2003
    Location
    Springfield
    Car Year, Make, Model: '66 Mustang, 76 Corvette
    Posts
    5,333

    Originally posted by R Pope
    Sure, go for it, thats how you learn! One caution--don't overtighten the four screws on each float bowl, you can warp the carb body and cause all kinds of problems. It can be filed flat again, but better not to do it in the first place. You should check the body with a straightedge when its apart anyway.
    Also don't overtighten the four small screws that secure the accelerator pump housing. They strip very easily and will cause more grief than overtightening the float bowl screws.
    Ken Thomas
    NoT FaDe AwaY and the music didn't die
    The simplest road is usually the last one sought
    Wild Willie & AA/FA's The greatest show in drag racing

  15. #15
    daveid's Avatar
    daveid is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2005
    Location
    n
    Posts
    157

    lol. Ya i thought about that. sorry, newbie here and only really have experiance with an electric pump. sorry.

    david

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink