Carb suggestions..

I think I'm running my engine thirsty when I look at all these guides that says I should be using a bigger carb on my motor.

I'll list what all I've done to this motor and I'll let you guys be the judge of what I should do for buying a newer/better carb that'll help me breath better:

I have a generic Goodwrench SBC "Hecho En Mexico" 350 4-bolt main block with casting#: 10036033 that I've built and I put it into my 66 Chevrolet Impala 4-door. Big heavy car. Using the stock heads that came with crate motor.

All performance upgrades are listed here

Exhaust info

I need to know what carburator size/type for now would be best for this setup.


And if you're daring, help me choose some heads and an intake manifold that would match up nicely to the carb and camshaft with a spending limit of about 1500$

AFR 180 cc heads with 68cc combustion chambers and an Edelbrock RPM intake. Those heads should run you between $1250-1300, and a polished or coated RPM manifold will still leave you with a little change.

www.airflowresearch.com

Also, any idea what hp I'm making? :P I have no clue what i've got :D

my first choice would be a Q-jet....my second choice would be a 600 vac. sec. Holley.

From the info you gave, I think you are just about in the right place for your build; you should be getting around 300, plus a bit. If you want more from the engine, you're going to have to think more cam , even before you go to better flowing heads; but with heads, a new cam will be almost mandatory, as well as more carb, or the gains will most likely be minimal. Of course, one change begets the need for another - it's a never ending story.