Originally posted by gassersrule_196
cancelled i thought post-poned is what really happened so it gives me a fire under my tush to get it running good for the races its acting weird still it will be idling at about 1,00 rpm's just fine then a minute later it will just start climbing to 2,000 rpm sprayed wd-40 around the base to see if it had a vacum leak it didnt so wtf!?!?!?!?!?

..............scooter
if its not a vac. leak then it sounds like its still in that base plate. sounds like the linkge might be holding the butterflys open a little. have you taken the linkage off of the carb., from the accl. to see if it would idle down that away? . how do you get it to idle down, by holding it closed with your hand? just some thoughts.