Is there a cold valve lash setting for the 302 DZ solid lifters ? I think hot is .030 but once I install cross ram valve covers wont come off, also what spark plug is best for this setup? Thanks for any help!
Printable View
Is there a cold valve lash setting for the 302 DZ solid lifters ? I think hot is .030 but once I install cross ram valve covers wont come off, also what spark plug is best for this setup? Thanks for any help!
See this recommendation from Crane "Compensating for a cold engine when adjusting valve lash".....
http://www.cranecams.com/?show=faq&id=4