Thread: 327 350hp timing
-
06-16-2005 11:17 AM #1
327 350hp timing
Does anyone have the correct information for timing for a 327 350hp were should i be stetting it at.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
06-16-2005 11:36 AM #2
Re: 327 350hp timing
Originally posted by lowboy73
Does anyone have the correct information for timing for a 327 350hp were should i be stetting it at.
10 degrees on a 66 & 67 corvette
No more than 36-38 total
-
06-16-2005 11:38 AM #3
thank you that helps.
I have been told 10 to 12
and higher on a hei
-
06-23-2005 06:44 AM #4
The L79s also used a different vacuum advance canister. They may still be available over the parts counter.I intend to live forever; so far, so good.
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project